My Cert

Got it

Cisco Lab 1 : Network Design from the requirement

Network Design from the requirement, let's go.

After we see the requirement from previous post, we can design the diagram as picture.
We'll design ...

1. Core service porvider by assign P router as P1 and P2, PE router as PE1 - 8 for support CE router of customers.

2. From 1st customer project, assign R1-DMVPN and R2-DWVPN as DMVPN Hub, and R3-DMVPN and R4-DMVPN as DMVPN-Spoke that on different site.

3. From 2nd customer project, assign IP-SEC R1 and IP-SEC R2 as SSO-IP-SEC Router on HQ site, and IP-SEC R3 as branch site that far away.

4. As for other Router, we'll talk about that after both project finish.

(Sorry for my english)

Cisco Lab 1 start

First of all, we'll design infrastructure of service provider part (MPLS CORE) and then assign PE/CE of customer site respectively. After that, we assign CE to connect with PE in each customer's projects.
1st Customer project: Customer want inplement HQ site to Branchs by use DMVPN on MPLS link that service provider support. By routing protocol that use between HQ and Branch is OSPF.
2nd Customer project: Customer want inplement stateful switchover IPsec between HQ site to Branch on service provider link. By routing protocol that use between HQ and Branch is OSPF but customer request that between site the router must see routing table each other in term of internal OSPF [O] as same area.